Simulator

What you should see is this:

Usage: process-run.py [options

Options:
  -h, --help            show this help message and exit
  -s SEED, --seed=SEED  the random seed
  -l PROCESS_LIST, --processlist=PROCESS_LIST
                        a comma-separated list of processes to run, in the
                        form X1:Y1,X2:Y2,... where X is the number of
                        instructions that process should run, and Y the
                        chances (from 0 to 100) that an instruction will use
                        the CPU or issue an IO
  -L IO_LENGTH, --iolength=IO_LENGTH
                        how long an IO takes
  -S PROCESS_SWITCH_BEHAVIOR, --switch=PROCESS_SWITCH_BEHAVIOR
                        when to switch between processes: SWITCH_ON_IO,
                        SWITCH_ON_END
  -I IO_DONE_BEHAVIOR, --iodone=IO_DONE_BEHAVIOR
                        type of behavior when IO ends: IO_RUN_LATER,
                        IO_RUN_IMMEDIATE
  -c                    compute answers for me
  -p, --printstats      print statistics at end; only useful with -c flag
                        (otherwise stats are not printed)

The most important option to understand is the PROCESS_LIST (as specified by the -l or --processlist flags) which specifies exactly what each running program (or “process”) will do. A process consists of instructions, and each instruction can just do one of two things:

• use the CPU
• issue an IO (and wait for it to complete)

When a process uses the CPU (and does no IO at all), it should simply alternate between RUNNING on the CPU or being READY to run. For example, here is a simple run that just has one program being run, and that program only uses the CPU (it does no IO).

prompt> ./process-run.py -l 5:100 

Try it out yourself in the terminal provided below:

Here is the expected output:

Produce a trace of what would happen when you run these processes:

Process 0
  cpu
  cpu
  cpu
  cpu
  cpu

Important behaviors:
  System will switch when the current process is FINISHED or ISSUES AN IO
After IOs, the process issuing the IO will run LATER (when it is its turn)

Here, the process we specified is “5:100” which means it should consist of 5 instructions, and the chances that each instruction is a CPU instruction are 100%.

You can see what happens to the process by using the -c flag, which computes the answers for you:

prompt> ./process-run.py -l 5:100 -c
Time     PID: 0        CPU        IOs
  1     RUN:cpu          1
  2     RUN:cpu          1
  3     RUN:cpu          1
  4     RUN:cpu          1
  5     RUN:cpu          1

This result is not too interesting: the process is simple in the RUN state and then finishes, using the CPU the whole time and thus keeping the CPU busy the entire run, and not doing any I/Os.

Let’s make it slightly more complex by running two processes:

prompt> ./process-run.py -l 5:100,5:100

Try it out yourself in the terminal provided below:

You will see the following output:

Produce a trace of what would happen when you run these processes:

Process 0
  cpu
  cpu
  cpu
  cpu
  cpu

Process 1
  cpu
  cpu
  cpu
  cpu
  cpu

Important behaviors:
  Scheduler will switch when the current process is FINISHED or ISSUES AN IO
  After IOs, the process issuing the IO will run LATER (when it is its turn)

In this case, two different processes run, each again just using the CPU. What happens when the operating system runs them? Let’s find out:

prompt> ./process-run.py -l 5:100,5:100 -c
Time     PID: 0     PID: 1        CPU        IOs
  1     RUN:cpu      READY          1
  2     RUN:cpu      READY          1
  3     RUN:cpu      READY          1
  4     RUN:cpu      READY          1
  5     RUN:cpu      READY          1
  6        DONE    RUN:cpu          1
  7        DONE    RUN:cpu          1
  8        DONE    RUN:cpu          1
  9        DONE    RUN:cpu          1
 10        DONE    RUN:cpu          1

As you can see above, first the process with “process ID” (or “PID”) 0 runs, while process 1 is READY to run but just waits until 0 is done. When 0 is finished, it moves to the DONE state, while 1 runs. When 1 finishes, the trace is done.

Let’s look at one more example before getting to some questions. In this example, the process just issues I/O requests. We specify here that I/Os take 5 time units to complete with the flag -L. Run the following command in the terminal provided below:

prompt> ./process-run.py -l 3:0 -L 5

Here is the expected output:

Produce a trace of what would happen when you run these processes:

Process 0
  io-start
  io-start
  io-start

Important behaviors:
  System will switch when the current process is FINISHED or ISSUES AN IO
  After IOs, the process issuing the IO will run LATER (when it is its turn)

What do you think the execution trace will look like? Let’s find out:

prompt> ./process-run.py -l 3:0 -L 5 -c
Time     PID: 0        CPU        IOs
  1  RUN:io-start          1
  2     WAITING                     1
  3     WAITING                     1
  4     WAITING                     1
  5     WAITING                     1
  6* RUN:io-start          1
  7     WAITING                     1
  8     WAITING                     1
  9     WAITING                     1
 10     WAITING                     1
 11* RUN:io-start          1
 12     WAITING                     1
 13     WAITING                     1
 14     WAITING                     1
 15     WAITING                     1
 16*       DONE

As you can see, the program just issues three I/Os. When each I/O is issued, the process moves to a WAITING state, and while the device is busy servicing the I/O, the CPU is idle.

Now, let’s print some stats (run the same command as above, but with the -p flag) to see some overall behaviors:

Stats: Total Time 16
Stats: CPU Busy 3 (18.75%)
Stats: IO Busy  12 (75.00%)

As you can see, the trace took 16 clock ticks to run, but the CPU was only busy less than 20% of the time. The IO device, on the other hand, was quite busy. In general, we’d like to keep all the devices busy, as that is a better use of resources.

There are a few other important flags:

  -s SEED, --seed=SEED  the random seed  
    this gives you way to create a bunch of different jobs randomly

  -L IO_LENGTH, --iolength=IO_LENGTH
    this determines how long IOs take to complete (default is 5 ticks)

  -S PROCESS_SWITCH_BEHAVIOR, --switch=PROCESS_SWITCH_BEHAVIOR
                        when to switch between processes: SWITCH_ON_IO, SWITCH_ON_END
    this determines when we switch to another process:
    - SWITCH_ON_IO, the system will switch when a process issues an IO
    - SWITCH_ON_END, the system will only switch when the current process is done 

  -I IO_DONE_BEHAVIOR, --iodone=IO_DONE_BEHAVIOR
                        type of behavior when IO ends: IO_RUN_LATER, IO_RUN_IMMEDIATE
    this determines when a process runs after it issues an IO:
    - IO_RUN_IMMEDIATE: switch to this process right now
    - IO_RUN_LATER: switch to this process when it is natural to 
      (e.g., depending on process-switching behavior)